Full Automatic Dry Mortar Mixing Plant 30t/h Dry Mortar Production Line

Description

The 10tph workshop type dry mortar mixer include the follwing parts: sand bucket elevator, cement silo, screw conveyor, sand doser, cement doser, mixer, final product storage hopper, valve bag packer.

The premix dry mortar plant work process is as follow:
Put the classified dry sand into the inlet of bucket elevator, hoist the sand into the sand doser, dosing the cement, put the additives into the mixer from the additive hopper, which is onto the mixer, after mixing, discharge the final product into the storage silo, then flow into the packer, pack into small bags.

During the dry mortar mixer is running, the bucket elevator hoist the sand into doser, wait for next batch. The cement screw work at the same time.The whole system work continuously.

It is consist of the following 8 systems
1. The Raw Material Storage Silos
2. The Additive Storage Silos
3. The Dried Sand Elevating System
4. Weighing System
5. The Mixing System
6. The Elevating System
7. Conveyor Belt
8. The Drying Syste
9. Dust Collecting System

Technical Parameters

Application

Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc.

Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc.

Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.